
Armoured Cable
Rubber Flexible Cable
Control Flexible Cable
PVC Flexible Cable
High Temperature Cables
Fixed Wiring Cable
LSZH Flexible Cable
BS5308 Instrumentation Cable
Belden Cable
Belden Alternative Cable
Fire Performance Cable
Data Cable
Coaxial Cable
Telephone Cable
Defence Standard Cable
Aluminium Conductors
Profibus and Profinet Cable
Welding Cable
Solar Cable
Harmonised Cable
Signalling Cables
Power Cables
Earthing Cable
Telecom Cable
Points Heating Cable
Overhead Line Cable
Rolling Stock
Home » British Standard Cables » BS5308 Cable » BS5308 Instrumentation Cable P1 T2
BS5308 Instrumentation Cable Part 1 Type 2
Eland Product Group: I
Application: BS5308 cables are designed to carry communication and control signals in a variety of installation types including those found in the petrochemical industry. The signals can be of analogue, data or voice type and from a variety of transducers such as pressure, proximity or microphone. BS 5308 cables are designed to form part of an intrinsically safe system and the technical information required to determine their suitability for this application is contained within the datasheet. Part 1 Type 2 cables are designed where a greater degree of mechanical protection is required namely outdoor / exposed or direct burial at suitable depth. Being BS 5308 Part 1 the insulation material is either PE or XLPE. The PVC sheathing material has an OI >30% and HCL <15% and the LSZH material is of type LTS3. Collectively and individually screened pairs are available within the range where further signal security is required.
Standards: BS/PAS 5308, BS EN 60228, BS 6234, BS 50363, IEC 60332-1, IEC 60332-3-24
Conductor: Class 2 or 5 plain copper conductors
Pairing: Two insulated conductors uniformly twisted together
Insulation: PE (Polyethylene) or XLPE (Cross Linked Polyethylene)
Drain wire: Tinned copper
Shielding: Aluminium / Polyester Tape
Bedding: PE (Polyethylene)
Armouring: GSWA (Galvanised Steel Wire Armour)
Sheath: PVC (Polyvinyl Chloride) to BS7655 or LSZH (Low Smoke Zero Halogen)
Sheath Colour: Blue or Black
Voltage Rating: 300/500V
Temperature Rating:
Fixed: +90ºC
Installation: +50ºC
Minimum Bend Radius: 18 x Overall Diameter
For more information please consult a member of the Sales Team.
BS5308 Instrumentation Cable Part 1 Type 2
| Eland Part Number mm² |
Screening Type | No. of Pairs | No. of Cores | Nominal Cross Sectional Area |
|---|---|---|---|---|
| I0175P1T2CL* | COLLECTIVELY | 1 | 2 | 0.75 |
| I0175P1T2CPBK | COLLECTIVELY | 1 | 2 | 0.75 |
| I0115P1T2CPBK | COLLECTIVELY | 1 | 2 | 1.50 |
| I0115P1T2CLBL | COLLECTIVELY | 1 | 2 | 1.50 |
| I0115P1T2CLBK | COLLECTIVELY | 1 | 2 | 1.50 |
| I0315P1T2CLBL | COLLECTIVELY | - | 3 | 1.50 |
| I0475P1T2CLBK | COLLECTIVELY | - | 4 | 0.75 |
| I0475P1T2CP* | COLLECTIVELY | - | 4 | 0.75 |
| I0505P1T2CPBK | COLLECTIVELY | 5 | 10 | 0.50 |
| I0575P1T2CLBK | COLLECTIVELY | 5 | 10 | 0.75 |
| I1005P1T2CPBK | COLLECTIVELY | 10 | 20 | 0.50 |
| I1075P1T2CPBK | COLLECTIVELY | 10 | 20 | 0.75 |
| I0275P1T2ICPBK | INDIVIDUALLY AND COLLECTIVELY | 2 | 4 | 0.75 |
| I0505P1T2ICLBK | INDIVIDUALLY AND COLLECTIVELY | 5 | 10 | 0.50 |
| IO575P1T2ICP* | INDIVIDUALLY AND COLLECTIVELY | 5 | 10 | 0.75 |
| I1005P1T2ICPBK | INDIVIDUALLY AND COLLECTIVELY | 10 | 20 | 0.50 |
