Eland Product Group: A9S

Application: SWA Cable - power and auxiliary control cables for use in power networks, underground, outdoor and indoor applications and for use in cable ducting.

Standards: BS5467, IEC 60502

Full Product Specification

Eland Product Group: A9L

Application: SWA Cable - power and auxiliary control cables for use in power networks, underground, outdoor and indoor applications and for use in cable ducting. For installation where fire, smoke emission and toxic fumes create a potential threat to life and equipment.

Standards: BS6724, IEC 60754-1

Full Product Specification

Eland Product Group: A2G

Application: For the transmission of high currents from the electric welding machine to the welding tool. Suitable for flexible use under rough conditions, on assembly lines and conveyor systems, in machine tool and motor car manufacturing, ship building, for manually and automatically operated line and spot welding machines.

Standards: BS638 Part 4, VDE0282-6, CENELEC HD22.6

Full Product Specification

Eland Product Group: A9M

Application: Cable used to distribute three phase a.c. electrical power supplies at nominal system voltages of 33kV to traction substations on D.C. electrified lines.

Standards: NR/PS/ELP/00008 (formerly RT/E/PS/00008) BS6622, BS6234, BS7454, IEC 60502-2, IEC 60840

Full Product Specification

Eland Product Group: A6G and A5G

Application: These cables are designed to provide high flexibility and have the capacity to withstand weather, oils/greases, mechanical and thermal stresses. Applications include handling equipment, mobile power supplies, worksites, stage and audio visual equipment, port areas and dams. Also for use in drainage and water treatment, cold environments and severe industrial environments.

Read more about H07RN-F Cables and their applications.

Standards: BS7919, CENELEC HD22.4 S4

Full Product Specification

Eland Product Group: A1F

Application: Suitable for AC and DC power supplies on Telecom equipment and power applications where flexibility is required.

Standards: Generally to BS6004, BS EN/IEC 60228

Full Product Specification

Eland Product Group: A2T

Application: Tri-rated Cable panel wiring is a high temperature, flame retardant cable designed for use in the switch control, relay and instrumentation panels of power switchgear and for purposes such as internal connectors in rectifier equipment, motor starters and controllers. Tri-rated Cable is sometimes referred to as BS6231 Cable, H07V2-K or Panel Wire.

Standards:
BS6231 Type CK
UL Subj.758
CSA c.22.2 No. 127 (only applicable for sizes up to 120mm²)
HD 21.7 S2*

Full Product Specification

Eland Product Group: A2X

Application: 6491X Cable H07V-R/H07V-U to BS6004 is suitable for power and lighting circuits and building wiring. The cable is intended for use in semi-flush exposed conduits and embedded conduits as well as in closed installation ducts, and is ideal for the internal wiring of appliances and apparatus.

Standards: BS6004, BASEC approved*

Full Product Specification

Eland Product Group: A9N

Application: For use where increased electrical and mechanical protection is required, preferably for underground laying, especially in subscriber networks, power stations as well as control cables for the transmission of control impulses and test data.

Standards: VDE0276 part 603, CENELEC HD603 S1, IEC 60502

Full Product Specification

Eland Product Group: A9R

Application: A flexible power and control cable designed for fixed applications. Manufactured with flexible conductors in order to facilitate installations with sinuous courses.

Standards: UNE 21123-2, 60502-1, EN 50265, IEC 60332-1

Full Product Specification

Eland Product Group: A2G

Application: For the transmission of high currents from the electric welding machine to the welding tool. Suitable for flexible use under rough conditions, on assembly lines and conveyor systems, in machine tool and motor car manufacturing, ship building, for manually and automatically operated line and spot welding machines.

Standards: BS638 Part 4, VDE0282-6, CENELEC HD22.6

Full Product Specification

Eland Product Group: A3T

Application: BR880 solid sector shaped conductors for trackside signalling power supplies.

Standards: BR880, BS5467, BS6346

Full Product Specification

Eland Product Group: A9H

Application: These cables are intended for fixed installation in dry and moist rooms as well as in masonry and concrete, in and under plaster; not for underground installation. NHXMH-J/O are especially used in buildings with a high concentration of persons or valuable property, where improved fire characteristics are needed. This product conforms to 73/23/EW G directive (low voltage directive) CE.

Standards: VDE 0250 (part 214), VDE 0482 (part 266-2-4, test type C)

Full Product Specification

Eland Product Group: A5V

Application: Designed for use in the switch control, relay and instrumentation panels of power switchgear and for purposes such as internal connectors in rectifier equipment, motor starters and controllers.

Standards: BS6004, CENELEC HD21.3

Full Product Specification

Eland Product Group: A9N

Application: Power and control cable for fixed installation. Can be used indoors, outdoors, underground, in concrete and in water.

Standards: IEC60502-1
Generally to VDE0276 and VDE0271.

Full Product Specification

Eland Product Group: A1G

Application: For the transmission of high currents from the electric welding machine to the welding tool. Suitable for flexible use under rough conditions, on assembly lines and conveyor systems, in machine tool and motor car manufacturing, ship building, for manually and automatically operated line and spot welding machines.

Standards: BS638 Part 4* BS EN 60332-1-2

Full Product Specification

Eland Product Group: A3Y

Application: Light duty cable for use in domestic premises, kitchens and offices. For use with light portable appliances such as radios, table lamps and office machines.

Standards: BS6500, CENELEC HD21.5, VDE 281

Full Product Specification

Eland Product Group: A3Y

Application: Used as an indoor general wiring cable primarily for installations in public areas. Examples include use on pendant lighting drops or as a general supply lead.

Standards: BS6500

Full Product Specification

Eland Product Group: A2G

Application: For the transmission of high currents from the electric welding machine to the welding tool. Suitable for flexible use under rough conditions, on assembly lines and conveyor systems, in machine tool and motor car manufacturing, ship building, for manually and automatically operated line and spot welding machines.

Standards: BS638 Part 4, DIN VDE 0282-6, CENELEC HD22.6

Full Product Specification

Eland Product Group: A1F LS

Application: Suitable for D.C. power supplies on Telecom equipment and power applications where flexibility is required. The cables produce no corrosive gases when burnt which is important where electronic equipment is installed.

Conductor: Class 5 flexible annealed plain copper conductors to BS EN 60228:2005 (previously BS6360)

Full Product Specification

Eland Product Group: A1T

Application: For indoors and outdoors, in dry as well as wet location on motorised vehicles, or battery powered equipment such as fork lifts and field conveyors. Also in high quality booster cables.

Standards: Figure 8 configuration based on VDE0250

Full Product Specification

Eland Product Group: A3Z

Application: Suitable for use in conduit and for fixed, protected installation. In particular for installation where fire, smoke emission and toxic fumes create a potential threat.

Standards: BS7211, BASEC approved*, BS EN/IEC 60228

Full Product Specification

Eland Product Group: A9M

Application: Power cables for power networks, underground, outdoors and in cable ducting. In particular for installation where fire, smoke emission and toxic fumes create a potential threat.

Standards: BS7835, IEC 60754-1

Full Product Specification

Eland Product Group: A5Q

Application: Flexible cords suitable for use in domestic premises, kitchens and offices. Also suitable for use in hot situations such as immersion heaters. Good resistance to oil and grease.

Standards: BS6500, VDE 0282

Full Product Specification

Eland Product Group: A3T

Application: BR880 solid sector shaped conductors for trackside signalling power supplies.

Standards: BR880, BS5467, BS6346

Full Product Specification

Eland Product Group: A6K

Application: Coil leads are used mainly in electrical machinery and panel wiring. The HOFR sheath resists oil and varnish and the stranding is designed as a compromise between flexibility and positional stability. Also suitable as an alternative to tri-rated and bi-rated cable in certain applications.

Standards: BS6195 Type 4

Full Product Specification

Eland Product Group: A5Y and A6Y

Application: For use in household appliances such as washing machines, spin dryers and refrigerators. Generally unsuitable for outdoor use or industrial applications.

Standards:
0.5 - 2.5mm² to BS6500,
4.0mm² to BS7919
6.0mm² generally to BS7919
VDE28
CENELEC HD21.5

Full Product Specification

Eland Product Group:

Application:

Eland Product Group: A1Y

Application: Fixed Installation in dry or damp areas for domestic and light industrial wiring.

Standards: BS6004

Full Product Specification

Eland Product Group: A5Z

Application: Used as an indoor general wiring cable primarily for installations in public areas. Examples include use on pendant lighting drops or as a general supply lead within hospital or airport projects. For installation where fire, smoke emission and toxic fumes create a potential threat to life and equipment.

Standards: IEC 60092-353

Full Product Specification

Eland Product Group: A9M

Application: Power cables for power networks, underground, outdoors and in cable ducting.

Standards: BS6622

Full Product Specification

Eland Product Group: A9M

Application: Power cables for power networks, underground, outdoors and in cable ducting.

Standards: BS6622, BS EN/IEC 60228

Full Product Specification

Eland Product Group: A5K

Application: For installation typically in public help points (PHP), public address (PA), station announcement platforms (SAP) & CCTV camera power systems. This Low Smoke Zero Halogen cable has been designed to provide superior flame retardance and circuit integrity, together with optimised ease of installation characteristics and complies with LU Section 12 station regulations.

Standards:
BS7629-1, BS 5839-1:2002, BS 8434-1:2003, BS EN 50200 PH30, BS 6387 C W Z, IEC 60332-3, IEC 60332-1, BS EN 50265, BS EN 50266, IEC 60754, BS EN 50267, IEC 61034, BS EN 50268.

Full Product Specification

Eland Product Group: A1E

Application: For the transmission of high currents from the electric welding machine to the welding tool. Suitable for flexible use under rough conditions, on assembly lines and conveyor systems, in machine tool and motor car manufacturing, ship building, for manually and automatically operated line and spot welding machines.

Standards: BS638 Part 4* BS EN 60332-1-2

Full Product Specification

Eland Product Group: A3BR

Application: To be used for the purpose of screening telecommunication cables from electrical interference.

Standards: NR/PS/TEL/31102(BR1817)/BS6485

Full Product Specification

Eland Product Group: A6F

Application: Firecel SR 114E Fire Performance Cable is intended for use in fire detection and fire alarm systems, and emergency lighting circuits. Firecel 114E Enhanced cable is recommended for situations where fire cables may need to remain operating correctly for a longer period than is expected of a standard fire cable. For example, in buildings without sprinkler systems, which have a longer evacuation process due to the size, complexity or purpose of the building, or any building that has been assessed as requiring enhanced fire protection.

Standards:
BS 5839-1:2002
Code of practice for fire system design, installation, commissioning and maintenance.

BS 7629-1:2008
Low emission of smoke and corrosive gases

BS EN 50200 PH120
Temperature: 830 °C
Flame and shock for 120 minutes

BS 8434-2:2003 +A2:2009
Temperature: 930 °C
Flame and shock for 60 minutes.
+ flame, shock and water for 60 minutes

BS 6387
Category C-W-Z
C - Resistance to fire at 950ºC for 3 hours
W - Resistance to fire with water at 950ºC for 3 hours
Z - Resistance to fire with mechanical shock at 950ºC for 3 hours

LPCB approved

Download Firecel SR 114E LPCB Certification as a pdf

Full Product Specification

Eland Product Group: A2Z

Application: In pipes or ducts and internal wiring of appliances with maximum operating temperatures of 90°C, and generally in areas (such as public and government buildings) where smoke and toxic fumes may cause a threat to life and equipment. The cables produce no corrosive gasses when burnt which is particularly important where electronic equipment is installed.

Standards: BS7211, CENELEC HD22.9, IEC 60332-3-24

Full Product Specification

Eland Product Group: A2F

Application: Highly flexible single core conductors with a great variety of industrial applications, such as cable harnesses, panel wiring and power generation.

Standards: IEC 60332-1

Full Product Specification

Eland Product Group: A5Y

Application: Supply leads for use as 318-Y but particularly for use in high temperature zones, for internal wiring or supply cords to electrical apparatus. Not suitable for outdoor use.

Standards: BS6500, BS7919 above 4.0mm²

Full Product Specification

Eland Product Group: A6Q

Application: For connecting equipment such as pumps, generators and lighting to the mains supply and generally for use in arduous industrial environments where good flexibility and resistance to mechanical abrasion is essential.

Read more about H07BN4-F Cables and their applications.

Standards:
BS7919 (Superseded BS6007 in 2003)
CEI 20-19/13
20-35 (EN60332-1) / 20-22III (EN50266) / 20-37 (EN50267)
CENELEC HD22.13.S1/A1

Full Product Specification

Eland Product Group: A8I

Application: This high performance cable is designed to operate under more arduous high temperature conditions, providing moisture resistance, toughness, flexibility and a continous conductor operating temperature of 250°C.

Conductor: Class 5 flexible nickel-plated copper conductor

Full Product Specification