Fire Performance Cable

Fire Performance Cables are mainly used in fire alarms and emergency lighting circuits. Eland's Fire Performance Cables are LPCB approved. Firecel 114H Standard Fire Cable is suitable for installations where circuit integrity must be maintained in the event of a fire.

Firecel 114E Enhanced is recommended for applications where the cable may need to operate for an extended period of time in comparison to a standard Fire Cable e.g buildings of larger size where evacution times are greater or buildings where sprinkler systems are not installed.

Firecel 114H Standard is tested to ensure compliance of BS EN 50200 circuit integrity for 30 mins (PH30) and 60 mins (PH60) for 1.5mm² and above. Firecel 114H is also certified to pass BS EN 50200 Annex E for 30 mins. Firecel 114E Enhanced is designed to survive over 120 minutes (PH120) as well as meeting the requirements for BS.

[ close ]

Firecel SR 114E Enhanced Fire Cable PH120 Toggle

Eland Product Group: A6F

Application: Firecel SR 114E Fire Performance Cable is intended for use in fire detection and fire alarm systems, and emergency lighting circuits. Firecel 114E Enhanced cable is recommended for situations where fire cables may need to remain operating correctly for a longer period than is expected of a standard fire cable. For example, in buildings without sprinkler systems, which have a longer evacuation process due to the size, complexity or purpose of the building, or any building that has been assessed as requiring enhanced fire protection.

Standards:
BS 5839-1:2002
Code of practice for fire system design, installation, commissioning and maintenance.

BS 7629-1:2008
Low emission of smoke and corrosive gases

BS EN 50200 PH120
Temperature: 830 °C
Flame and shock for 120 minutes

BS 8434-2:2003 +A2:2009
Temperature: 930 °C
Flame and shock for 60 minutes.
+ flame, shock and water for 60 minutes

BS 6387
Category C-W-Z
C - Resistance to fire at 950ºC for 3 hours
W - Resistance to fire with water at 950ºC for 3 hours
Z - Resistance to fire with mechanical shock at 950ºC for 3 hours

LPCB approved

Download Firecel SR 114E LPCB Certification as a pdf

Full Product Specification

Firecel SR 114H Standard Fire Cable PH30/PH60 Toggle

Eland Product Group: A6F

Application: Firecel SR 114H Standard Fire Cable is primarily intended for use in fire detection and fire alarm systems, emergency lighting circuits or if cables need to properly operate when fire resistance is required.

Standards:
BS 5839-1:2002
Code of practice for fire system design, installation, commissioning and maintenance.

BS 7629-1:2008
Low emission of smoke and corrosive gases

BS EN 50200 PH30 (all sizes)
Temperature: 830 °C
Flame and shock for 30 minutes

BS EN 50200 PH60 (1.5mm² and above)
Temperature: 830 °C
Flame and shock for 60 minutes

EN 50200 Annex E (previously BS 8434-1: 2003)
Temperature: 830 °C
Flame and shock for 15 minutes.
+ flame, shock and water for 15 minutes.

BS 6387
Category C-W-Z
C - Resistance to fire at 950ºC for 3 hours
W - Resistance to fire with water at 950ºC for 3 hours
Z - Resistance to fire with mechanical shock at 950ºC for 3 hours

LPCB approved

Download Firecel SR 114H LPCB Certification as a pdf

Full Product Specification