Armoured Cable
Rubber Flexible Cable
Control Flexible Cable
PVC Flexible Cable
High Temperature Cables
Fixed Wiring Cable
LSZH Flexible Cable
BS5308 Instrumentation Cable
Belden Cable
Belden Alternative Cable
Data Cable
Fire Performance Cable
Coaxial Cable
Telephone Cable
Defence Standard Cable
Aluminium Conductors
Profibus and Profinet Cable
Welding Cable
Solar Cable
Harmonised Cable
Signalling Cables
Power Cables
Earthing Cable
Telecom Cable
Points Heating Cable
Overhead Line Cable
Rolling Stock
Home » Rail Cables » Power Cables
11kV XLPE PVC Cable
Toggle
Eland Product Group: A9M
Application: Power cables for power networks, underground, outdoors and in cable ducting.
11kV XLPE LSZH Cable BS7835
Toggle
Eland Product Group: A9M
Application: Power cables for power networks, underground, outdoors and in cable ducting. In particular for installation where fire, smoke emission and toxic fumes create a potential threat.
33kV XLPE Cable
Toggle
Eland Product Group: A9M
Application: Power cables for power networks, underground, outdoors and in cable ducting.
Trackfeeder Cable
Toggle
Eland Product Group: A3T
Application: Provides the 650/750 volt DC supply from Traction Substations and Track Paralleling Huts to conductor rails, negative cable connections and where appropriate, bonding
Aluminium Power Cable
Toggle
Eland Product Group: A3T
Application: BR880 solid sector shaped conductors for trackside signalling power supplies.
MV Power Cable
Toggle
Eland Product Group: A9M
Application: Cable used to distribute three phase a.c. electrical power supplies at nominal system voltages of 33kV to traction substations on D.C. electrified lines.
High Voltage Power Cable 2XS(F)2Y, A2XS(F)2Y
Toggle
Eland Product Group: A9K
Application: The High Voltage power cables contained within this datasheet are suitable for the primary distribution of power up to a maximum network voltage of 110kV. Suitable for locations where mechanical protection is afforded by other means and where the additional protection of a moisture barrier has been determined not to be necessary, see 2XS(FL)2Y and A2XS(FL)2Y. The cables are triple extruded to the latest using proprietary materials on modern Catenary Line equipment to the latest IEC standards. Waterblocking tape options ensure that should the cable be damaged, repair lengths and associated works are kept to a minimum. The cables are provided as standard with a High Density Polyethylene chosen to give the best compromise between abrasion resistance and flexibility to ensure installation confidence. The range can be customised to meet specific project demands should the need arise.
11kV XLPE MDPE Cable
Toggle
Eland Product Group: A9M
Application: Power cables for power networks, underground and in cable ducting.
High Voltage Power Cable 2XS(FL)2Y, A2XS(FL)2Y
Toggle
Eland Product Group: A9K
Application: The HV Power Cables contained within this datasheet are suitable for the primary distribution of power up to a maximum network voltage of 110kV. The cables are triple extruded to the latest IEC standards, using proprietary materials on modern Catenary Line equipment. The Foil Laminate layer provides an effective moisture barrier and also imparts a limited increase in mechanical protection although it should be noted that these cables should be adequately protected from potential mechanical damage. Waterblocking tape options ensure that should the cable be damaged, repair lengths and associated works are kept to a minimum. The cables are provided with a High Density Polyethylene chosen to give the best compromise between abrasion resistance and flexibility to ensure installation confidence. The range can be customised to meet specific project demands should the need arise.