Rubber Flexible Cable
Control Flexible Cable
PVC Flexible Cable
High Temperature Cables
Fixed Wiring Cable
LSZH Flexible Cable
BS5308 Instrumentation Cable
Belden Alternative Cable
Fire Performance Cable
Defence Standard Cable
Profibus and Profinet Cable
Points Heating Cable
Overhead Line Cable
Eland Cables stocks a wide range of high quality cables, to various national and international standards and certifications. In this glossary you will find detailed descriptions of listed the standards.
|BS 2 E 21||Pren type electric cables for aircraft|
|BS215 : 1970||Electric conductors, aluminium and steel-cored aluminium|
|BS4066||Electric cables, tests under fire conditions. Replaced by BS EN 60332-1-1:2004 and BS EN 60332-2-1:2004|
|BS5308 Part 1||
Insulated intrinsically safe instrumentation cables.
|BS5308 Part 2||
Insulated intrinsically safe instrumentation cables.
|BS5467 : 1997||
Power Cables, armoured thermosetting-polymer insulated, for electricity supply.
|BS6004 : 2000||
Insulated cables, PVC insulated, non-armoured.
|BS6007 : 2006||Electric cables. Single core unsheathed heat resisting cables for voltages up to and including 450/750 V, for internal wiring|
|BS60228 : 2005||Conductors of insulated cables|
|BS6121-1 : 2005||Mechanical cable glands and armour glands. Requirements and test methods.|
|BS6141 : 1991||Flexible conductors, for high temperature zones - this standard has been withdrawn and replaced by tables in BS 6004:2000, BS 6007:2000, BS 6500:2000 and BS 7919:2001|
|BS6195 : 2006||Electric cables. Rubber or silicone rubber insulated flexible cables and cords for coil end leads|
|BS6231 : 2006||
Electric cables. Single core PVC insulated flexible cables of rated voltage 600/1000 V for switchgear and control gear wiring.
|BS6360 : 1991||Specification for conductors in insulated cables and cords . This standard is obsolescent and will be replaced by BS EN 60228|
|BS638 : Pt4 : 1996||
Arc welding power sources, equipment and accessories. Specification for welding cables.
|BS6469 : section 99.1 : 1992||Insulating, sheathing materials of electric cables, non electrical tests|
|BS6500 : 2000||
Electric cables. Flexible cords rated up to 300/500 V, for use with appliances and equipment intended for domestic, office and similar environments.
|BS6622 : 2007||
Cables with extruded cross linked polyethylene or ethylene propylene rubber insulation 3.8/6.6kV to19/33kV.
|BS6724 : 1997||
600/1000V,1900/3300V armoured electric cable with thermosetting insulation and low emission smoke, gases. Power Cables, armoured thermosetting-polymer insulated, for electricity supply.
|BS6883 : 1999||Elastomer insulated cables for fixed wiring in ship.|
|BS7211 : 1998||
Thermosetting insulated cables, non armoured, with low smoke and gas.
|BS7629-1 : 2008||Specification for 300/500V fire resistant electric cable having low emission of smoke and corrosive gases when affected by fire - multipair Cables|
|BS7835 : 2007||
Specification for armoured cables with extruded cross-linked polyethylene or ethylene propylene rubber insulation for rated voltages from 3.8/6.6 kV up to 19/33 kV having low emission of smoke and corrosive gases when affected by fire.
|BS7870-1 : 1996||LV and MV polymeric insulated cables for use by distribution and generation utilities. General|
|BS7884 : 1997||Specification for copper and copper-cadmium stranded conductors for overhead electric traction and power transmission systems|
|BS7889 : 1997||Electric cables. Thermosetting insulated, unarmoured cables for a voltage of 600/1000 V|
|BS7919 : 2001||
Electric cables. Flexible cables rated up to 450/750V, for use with appliances and equipment intended for industrial and similar environments.
|CSA 22.2 No 127 Type TEW||Equipment and Lead Wires|
|CW1128||Specification CW 1128 for cable polyethylene twin and polyethylene twin - screened|
|DIN VDE 250 Part 1 to Part 819||Cables, wires and flexible cords for power installation|
|DIN VDE 262||XLPE insulated and PVC sheathed installation cable up to 0.6/1kV|
|DIN VDE 266 : 2000-03||Power cables with improved characteristics in the case of fire Nominal voltage 0.6/1kV|
|DIN VDE 271 : 2007||Specification for power cables 0.6/1kV and above for special applications.|
|DIN VDE 276 part 605||Additional test methods|
|DIN VDE 276 part 620||Distribution cables with extruded insulation for rated voltages from 3.6/6(7.2)kV up to and including 20.8kV|
|DIN VDE 276-303 : 2010||Distribution cables of rated voltages Uo/U 0.6/1kV|
|DIN VDE 276-604 : 2008-02||0.6/1kV power cables with special fire performance for use in power stations.|
|DIN VDE 281 part 1 to part 404||PVC cables, wires and flexible cords for power installation|
|DIN VDE 282 part 1 to part 808||Rubber cables and flexible cords for power installation, heat resistant silicon rubber insulated cable, halogen free insulated cable, arc welding cable, rubber insulated lift cable, rubber sheathed flexible cables|
|EIA RS 232||TIA/EIA standard for serial transmission between computers and peripheral devices. Also known as RS-232|
|Generally to BS6004||Insulated cables, PVC insulated, non-armoured|
|Generally to BS6500||Flexible cables, insulated cords and cables|
|H03VV-F||Circular, PVC insulation/PVC sheathed, 300/300V, to BS6500.|
|H05BN4-F||Single Core, Rubber Insulated, HOFR Sheathed, 450/750V|
|H05V-K||Single Core, PVC Insulated Only, 300/300V|
|H05VV-F||PVC Insulated and Sheathed, 300/500V|
|H07BN4-F||Single Core, Rubber Insulated, HOFR Sheathed, 450/750V|
|H07V-K||Single Core, PVC Insulated Only, 450/750V, Flexible Conductor|
|H07V-R||Single Core, PVC Insulated Only, 450/750V, Stranded Conductor|
|IEC60598-1||Luminaires - General requirements and tests|
|RS 422||Electrical characteristics of the balanced voltage digital interface circuit|
|TIA/EIA 568||Commercial Building Telecommunications Wiring Standard Part 1 : General Requirements|
|UL 758||Safety of Appliance Wiring Material|