Armoured Cable
Control Flexible Cable
Rubber Flexible Cable
PVC Flexible Cable
High Temperature Cable
Fixed Wiring Cable
LSZH Flexible Cable
BS5308 Instrumentation Cable
Belden Cable
Belden Alternative Cable
Fire Performance Cable
Coaxial Cable
Data Cable
Telephone Cable
Defence Standard Cable
Aluminium Conductors
Profibus and Profinet Cable
Welding Cable
Solar Cable
Signalling Cable
Power Cable
Earthing Cable
Telecom Cable
Points Heating Cable
Overhead Line Cable
Rolling Stock
Your Industry
Rail and Transport Industry
A Link-up approved supplier, Eland Cables has a proven track record of supply to the rail industry, providing extensive knowledge and experience of working in partnership with Network Rail, and its approved contractors, to improve the safety and efficiency of UK rail infrastructure.
Eland’s expansive portfolio of Network Rail approved cables includes signalling, power, telecommunications, axle counter, points heating, overhead line and auxiliary cables. This range enables Eland to supply a broad spectrum of railway infrastructure projects from Signalling and Telecommunications to Electrification and Plant. In addition, Eland’s rail customers have the peace of mind that both Eland and our key supply partners are fully ISO 9001 accredited, allowing full batch traceability through the supply chain to the original source. (Refer to copies of accreditation, available upon request).
Eland has recently introduced additional cables to its range, specifically for main line and metro rolling stock and London Underground station track and signalling infrastructure, thus increasing its scope of supply even further.
In terms of service, to underpin its impressive range of rail cables, Eland offers just-in-time delivery to contractors that need to keep stockholding on site to a minimum – boasting an on-time delivery rate of over 98%. This allows customers to be sure that cable supply will not hold up project schedules. Furthermore, not only does Eland take your deadlines as seriously as you do, it can also offer a project-based cable cutting service which ultimately means less waste, faster installation and reduced costs on both skilled labour and materials. As rail projects increasingly focus on sustainability, reduced waste will also contribute to minimising environmental damage.
SWA Cable - BS5467 Steel Wire Armoured PVC
Toggle
Eland Product Group: A9S
Application: SWA Cable - power and auxiliary control cables for use in power networks, underground, outdoor and indoor applications and for use in cable ducting.
Standards: BS5467, IEC 60502
SWA Cable - BS5467 Steel Wire Armoured PVC
Toggle
Eland Product Group: A9S
Application: SWA Cable - power and auxiliary control cables for use in power networks, underground, outdoor and indoor applications and for use in cable ducting.
Standards: BS5467, IEC 60502
CY Control Flexible Cable to BS6500
Toggle
Eland Product Group: A5C
Application: Used as interconnecting cable for measuring, controlling or regulation in control equipment for assembly and production lines, conveyors and for computer units. Suitable for fixed installations or for flexible use when temporarily moved, and in conditions of medium mechanical stress. Can be used outdoors when protected, and in dry or moist conditions indoors.
Standards: Generally to BS6500
CY LSZH Control Flexible Cable to BS6500
Toggle
Eland Product Group: A5B
Application: For installation where fire, smoke emission and toxic fumes create a potential threat to life and equipment. Used as interconnecting cable for measuring, controlling or regulation in control equipment for assembly and production lines, conveyors and for computer units. Suitable for fixed installations or for flexible use when temporarily moved, and in conditions of medium mechanical stress. Can be used outdoors when protected, and in dry or moist conditions indoors.
Standards: Generally to BS6500, IEC 60754-1
YY Control Flexible Cable to BS6500
Toggle
Eland Product Group: A5Y
Application: Used as interconnecting cable for measuring, controlling or regulation in control equipment for assembly and production lines, conveyors and for computer units. Suitable for fixed installations or for flexible use in conditions of light mechanical stress. Can be used outdoors when protected, and in dry or moist conditions indoors.
Standards: Generally to BS6500, VDE0250
YY LSZH Control Flexible Cable to BS6500
Toggle
Eland Product Group: A5L
Application: For installation where fire, smoke emission and toxic fumes create a potential threat to life and equipment. Used as interconnecting cable for measuring, controlling or regulation in control equipment for assembly and production lines, conveyors and for computer units. Suitable for fixed installations or for flexible use in conditions of light mechanical stress. Can be used outdoors when protected, and in dry or moist conditions indoors.
Standards: Generally to BS6500, VDE0250, IEC 60332-3, IEC 60754-1
SY Control Flexible Cable to BS6500
Toggle
Eland Product Group: A5J
Application: Used as interconnecting cable for measuring, controlling or regulation in control equipment for assembly and production lines, conveyors and for computer units. Suitable for fixed installations or for flexible use in conditions of light mechanical stress. Can be used outdoors when protected, and in dry or moist conditions indoors.
The braided screen offers the best possible protection against mechanical damage and offers a level of Electro-magnetic shielding. The galvanised coating helps protect against corrosion.
Standards: Generally to BS6500, VDE0250
SWA Cable - BS6724 Steel Wire Armoured LSZH
Toggle
Eland Product Group: A9L
Application: SWA Cable - power and auxiliary control cables for use in power networks, underground, outdoor and indoor applications and for use in cable ducting. For installation where fire, smoke emission and toxic fumes create a potential threat to life and equipment.
Standards: BS6724, IEC 60754-1
Axle Counter Cable
Toggle
Eland Product Group: A8A
Application: Axle Counter cable is used to connect the various elements of the AzLM Axle Counter System. It is suitable for installation in trackside cable troughing, buried duct route and installed in open air on the ballast and clipped to sleepers as required. Quad types XQS and XQZ are used to connect the EAK Junction box or termination to the EAK (Mushroom) and Multi Twisted pair types XPS and XPZ are used to connect EAK to the ACE (Axle Counter Evaluator) equipment.
Standards: NR/L2/SIG/30060
Copper Trackside Cable LSZH
Toggle
Eland Product Group: A8T
Application: Suitable for installation in trackside cable troughing, and buried duct routes and generally in areas where smoke and toxic fumes may cause a threat to life and equipment. The cables produce no corrosive gasses when burnt which is particularly important where electronic equipment is installed.
PADS Approval: Certificate Number PA05/03862
Armoured Copper Trackside Cable LSZH
Toggle
Eland Product Group: A8T
Application: Suitable for installation in trackside concrete cable troughing, buried duct route or for direct burial installations, and generally in areas where smoke and toxic fumes may cause a threat to life and equipment. The cables produce no corrosive gasses when burnt which is particularly important where electronic equipment is installed.
PADS Approval: Certificate Number PA05/03862
11kV XLPE LSZH Cable BS7835
Toggle
Eland Product Group: A9M
Application: Power cables for power networks, underground, outdoors and in cable ducting. In particular for installation where fire, smoke emission and toxic fumes create a potential threat.
Standards: BS7835, IEC 60754-1
SWA Cable - BS6724 Steel Wire Armoured LSZH
Toggle
Eland Product Group: A9L
Application: SWA Cable - power and auxiliary control cables for use in power networks, underground, outdoor and indoor applications and for use in cable ducting. For installation where fire, smoke emission and toxic fumes create a potential threat to life and equipment.
Standards: BS6724, IEC 60754-1
6491B Conduit Wiring Cable H07Z-R to BS7211
Toggle
Eland Product Group: A3Z
Application: Suitable for use in conduit and for fixed, protected installation. In particular for installation where fire, smoke emission and toxic fumes create a potential threat.
Standards: BS7211, BASEC approved*, BS EN/IEC 60228
Twin Datalink Cable
Toggle
Eland Product Group: A8T
Application: Interconnecting cable for Solid State Interlocking (SSI) systems.
Standards: BR1932
Trackfeeder Cable
Toggle
Eland Product Group: A3T
Application: Provides the 650/750 volt DC supply from Traction Substations and Track Paralleling Huts to conductor rails, negative cable connections and where appropriate, bonding
Standards: NR/PS/ELP/21101 (formerly RT/E/S/21101)
Signalling Cable Type A1, A2, A3
Toggle
Eland Product Group: A5R
Application: Light Duty LSZH sheathed single and multi core generally for internal use. Smooth sheath suitable for installation in ducting
Standards: NR/PS/SIG/00005 (formerly RT/E/PS/00005)
Screening Conductor Cable PVC
Toggle
Eland Product Group: A3BR
Application: To be used for the purpose of screening telecommunication cables from electrical interference.
Standards: NR/PS/TEL/31102 (BR1817)/BS6485
Screening Conductor Cable LSZH
Toggle
Eland Product Group: A3BR
Application: To be used for the purpose of screening telecommunication cables from electrical interference in areas where smoke and toxic fumes may cause a threat to life and equipment.
Standards: NR/PS/TEL/31102(BR1817)BS6485
SCADA / Pilot Cable
Toggle
Eland Product Group: A8T
Application: Paired core compound filled supervisiory cables for modem based supervisory systems operating in the VF range 300 to 3000 Hz.
Standards: NR/PS/ELP/27220 (formerly RT/E/PS/0034)
Points Heating Cable
Toggle
Eland Product Group: A5RPH
Application: Designed for power distribution in points heating systems. These heavy duty cables offer protection from abrasion and mechanical impact whilst maintaining flexibility to ease installation.
Standards: NR/SP/ELP/40045 (formerly RT/E/PS/40045) BS7919
Junction Blocks
Toggle
Eland Product Group: A8B
Application: Designed for power distribution in railway points heating applications, the 4 way and 8 way jumper blocks offer a reliable method of connecting clamplock or strip heaters to their power supplies
Standards: NR/SP/ELP/40045 (formerly RT/E/S/40045)
MV Power Cable
Toggle
Eland Product Group: A9M
Application: Cable used to distribute three phase a.c. electrical power supplies at nominal system voltages of 33kV to traction substations on D.C. electrified lines.
Standards: NR/PS/ELP/00008 (formerly RT/E/PS/00008) BS6622, BS6234, BS7454, IEC 60502-2, IEC 60840
Firecel SR 114E Enhanced Fire Cable PH120
Toggle
Eland Product Group: A6F
Application: Firecel SR 114E Fire Performance Cable is intended for use in fire detection and fire alarm systems, and emergency lighting circuits. Firecel 114E Enhanced cable is recommended for situations where fire cables may need to remain operating correctly for a longer period than is expected of a standard fire cable. For example, in buildings without sprinkler systems, which have a longer evacuation process due to the size, complexity or purpose of the building, or any building that has been assessed as requiring enhanced fire protection.
Standards:
BS 5839-1:2002
Code of practice for fire system design,
installation, commissioning and maintenance.
BS 7629-1:2008
Low emission of smoke and corrosive gases
BS EN 50200 PH120
Temperature: 830 °C
Flame and shock for 120 minutes
BS 8434-2:2003 +A2:2009
Temperature: 930 °C
Flame and shock for 60 minutes.
+ flame, shock and water for 60 minutes
BS 6387
Category C-W-Z
C - Resistance to fire at 950ºC for 3 hours
W - Resistance to fire with water at 950ºC for 3 hours
Z - Resistance to fire with mechanical shock at 950ºC for 3 hours
LPCB approved
Download Firecel SR 114E LPCB Certification as a pdf
Fibre Trackside Cable
Toggle
Eland Product Group: A8T
Application: Fibre communications cable for use in high traffic and data rate requirements.
Standards: NR/PS/TEL/00014 (formerly RT/E/PS/00014)
Festoon Cable - External H05RNH-F
Toggle
Eland Product Group: A5F
Application: Flexible cords suitable for use in domestic premises, kitchens and offices. Also suitable for use in hot situations such as immersion heaters. Good resistance to oil and grease.
Standards: IEC 60598-1, H05RNH-F
Copper Trackside Cable
Toggle
Eland Product Group: A8T
Application: Suitable for installation in trackside concrete cable troughing or buried duct routes.
PADS Approval: Certificate Number PA05/03862
Bare Conductor
Toggle
Eland Product Group: A3BR
Application: To be used for the purpose of screening telecommunication cables from electrical interference.
Standards: NR/PS/TEL/31102(BR1817)/BS6485
Armoured Fibre Trackside
Toggle
Eland Product Group: A8T
Application: Armoured fibre communications cable for use in high traffic and data rate requirements
Standards: NR/PS/TEL/00014 (formerly RT/E/PS/00014)
Armoured Copper Trackside Cable
Toggle
Eland Product Group: A8T
Application: Suitable for installation in trackside concrete cable troughing, buried duct route or for direct burial installations.
PADS Approval: Certificate Number PA05/03862
Arctic Grade Cable
Toggle
Eland Product Group: A5A
Application: Designed to withstand severe external temperatures remaining flexible at temperatures as low as -40°C. Arctic Grade PVC mains cords manufactured to BS7919 will remain flexible at temperatures down to minus 40°C making them particularly suitable for outdoor applications and for use where flexibility is required at sub zero temperatures. At normal temperatures the cable is very limp and flexible, offering some of the characteristics usually found in elastomeric cables.
Standards: BS7919 Table 44, VDE281
Aluminium Power Cable
Toggle
Eland Product Group: A3T
Application: BR880 solid sector shaped conductors for trackside signalling power supplies.
Standards: BR880, BS5467, BS6346
6491X Cable H07V-R/H07V-U to BS6004
Toggle
Eland Product Group: A2X
Application: 6491X Cable H07V-R/H07V-U to BS6004 is suitable for power and lighting circuits and building wiring. The cable is intended for use in semi-flush exposed conduits and embedded conduits as well as in closed installation ducts, and is ideal for the internal wiring of appliances and apparatus.
Standards: BS6004, BASEC approved*
6491B Conduit Wiring Cable H07Z-R to BS7211
Toggle
Eland Product Group: A3Z
Application: Suitable for use in conduit and for fixed, protected installation. In particular for installation where fire, smoke emission and toxic fumes create a potential threat.
Standards: BS7211, BASEC approved*, BS EN/IEC 60228
33kV XLPE Cable
Toggle
Eland Product Group: A9M
Application: Power cables for power networks, underground, outdoors and in cable ducting.
Standards: BS6622
11kV XLPE PVC Cable
Toggle
Eland Product Group: A9M
Application: Power cables for power networks, underground, outdoors and in cable ducting.
Standards: BS6622, BS EN/IEC 60228
0361TQ Orange Welding Cable to BS638
Toggle
Eland Product Group: A1E
Application: For the transmission of high currents from the electric welding machine to the welding tool. Suitable for flexible use under rough conditions, on assembly lines and conveyor systems, in machine tool and motor car manufacturing, ship building, for manually and automatically operated line and spot welding machines.
Standards: BS638 Part 4* BS EN 60332-1-2
0361TQ Black Welding Cable to BS638
Toggle
Eland Product Group: A1G
Application: For the transmission of high currents from the electric welding machine to the welding tool. Suitable for flexible use under rough conditions, on assembly lines and conveyor systems, in machine tool and motor car manufacturing, ship building, for manually and automatically operated line and spot welding machines.
Standards: BS638 Part 4* BS EN 60332-1-2
FTN Screening Conductor Cable PVC
Toggle
Eland Product Group: A3BR
Application: To be used for the purpose of screening telecommunication cables from electrical interference.
Standards: NR/PS/TEL/31102 (BR1817)/BS6485
RIA21 Cable
Toggle
Eland Product Group: A6R
Application: Cables are designed for use in protected or exposed installation on traction and rolling stock within vehicles. May also find application in the connection of coil winding and flexible power leads.
Standards: RIA21
Signalling Cable Type B1, B2
Toggle
Eland Product Group: A5R
Application: Heavy Duty EPR insulated and Heavy Duty PCP sheathed single, twin and multicore cables
Standards: NR/PS/SIG/00005 (formerly RT/E/PS/00005)
Signalling Cable Type C1, C2, C3
Toggle
Eland Product Group: A5R
Application: Heavy Duty Signalling cable suitable for tails
Standards: NR/PS/SIG/00005 (formerly RT/E/PS/00005)
Signalling Cable Type D1, D2
Toggle
Eland Product Group: A5R
Application: LSZH single, twin and multicore cables
Standards: NR/PS/SIG/00005 (formerly RT/E/PS/00005)
Signalling Cable Type E1, E2, E3
Toggle
Eland Product Group: A5R
Application: LSZH signalling cable suitable for tails
Standards: NR/PS/SIG/00005 (formerly RT/E/PS/00005